DDD release notesDankDroneDownloader catalog
Whats New?
- Added support for ProRes 4444XQ and ProRes 422LT recording.
- Added support for using Jam Sync through the external timecode generator and the 3.5 mm microphone port.
- Added support for using DJI Ronin 4D Hand Grips Mount Universal Adapter connects to Ronin-S External GPS Module to increase stability when turning with the Ronin 4D at high speed.
- Added support for output clean HDMI footage using HDMI port.
- Added support for output up to 4K 4:2:0 60fps HDMI footage when recording at 4K.
- Added zoom control for using the right hand grip to control focus motor with E mount manual zoom lens.
- Added support for output signal with internal timecode and recording trigger signal through HDMI port.
- Added support for focus assistant through double-clicking to zoom-in.
- Added support for anamorphic display de-squeezing for the High-Bright Main Monitor.
- Added Frame Guide and Safety Zone when using playback.
- Added automatic cycle for single footage when using playback.
- Added ActiveTrack speed settings.
- Added support for menu control using the right hand grip.
- Added real-time reading of the gimbal three axes force mobile data for High-Bright Remote Monitor.
- Added 35mm equivalent focal length information read-in to the ProRes metadata.
- Fixed issue: noise was too loud when performing auto tune.
- Fixed issue: Ronin 4D shook at high frequency when tilting with the Z-Axis at lock mode.
- Fixed issue: the preset timecode at REC Run mode was reset after the gimbal reboot.
- Fixed issue: noise was too loud when switching the built-in ND with E Mount lens.
- Fixed issue: camera restarted when using right hand grip to adjust aperture with a manual lens.
Notes:
- The ProRes 4444XQ video can only be stored at DJI PROSSD.
- HDMI port cannot output signal when selecting ProRes 4444XQ.
- Exposure assistant, peak focus and LiDAR waveform will be disabled automatically for optimal performance when recording ProRes 4444XQ video at 6K/48fps or 4K/96fps and above.
- Left channel cannot be used when using Jam Sync through the 3.5 mm microphone port.
- Attach all the accessories to Ronin 4D before updating firmware.
- Attach the DJI Three-Channel Follow Focus to the High-Bright Remote Monitor to update firmware simultaneously.
- Make sure to update both the Video Transmitter and High-Bright Remote Monitor to the latest firmware
version. Otherwise, the video transmission may work abnormally.
- If the update fails, restart the device and try again.
- Added support for ProRes 4444XQ and ProRes 422LT recording.
- Added support for using Jam Sync through the external timecode generator and the 3.5 mm microphone port.
- Added support for using DJI Ronin 4D Hand Grips Mount Universal Adapter connects to Ronin-S External GPS Module to increase stability when turning with the Ronin 4D at high speed.
- Added support for output clean HDMI footage using HDMI port.
- Added support for output up to 4K 4:2:0 60fps HDMI footage when recording at 4K.
- Added zoom control for using the right hand grip to control focus motor with E mount manual zoom lens.
- Added support for output signal with internal timecode and recording trigger signal through HDMI port.
- Added support for focus assistant through double-clicking to zoom-in.
- Added support for anamorphic display de-squeezing for the High-Bright Main Monitor.
- Added Frame Guide and Safety Zone when using playback.
- Added automatic cycle for single footage when using playback.
- Added ActiveTrack speed settings.
- Added support for menu control using the right hand grip.
- Added real-time reading of the gimbal three axes force mobile data for High-Bright Remote Monitor.
- Added 35mm equivalent focal length information read-in to the ProRes metadata.
- Fixed issue: noise was too loud when performing auto tune.
- Fixed issue: Ronin 4D shook at high frequency when tilting with the Z-Axis at lock mode.
- Fixed issue: the preset timecode at REC Run mode was reset after the gimbal reboot.
- Fixed issue: noise was too loud when switching the built-in ND with E Mount lens.
- Fixed issue: camera restarted when using right hand grip to adjust aperture with a manual lens.
Notes:
- The ProRes 4444XQ video can only be stored at DJI PROSSD.
- HDMI port cannot output signal when selecting ProRes 4444XQ.
- Exposure assistant, peak focus and LiDAR waveform will be disabled automatically for optimal performance when recording ProRes 4444XQ video at 6K/48fps or 4K/96fps and above.
- Left channel cannot be used when using Jam Sync through the 3.5 mm microphone port.
- Attach all the accessories to Ronin 4D before updating firmware.
- Attach the DJI Three-Channel Follow Focus to the High-Bright Remote Monitor to update firmware simultaneously.
- Make sure to update both the Video Transmitter and High-Bright Remote Monitor to the latest firmware
version. Otherwise, the video transmission may work abnormally.
- If the update fails, restart the device and try again.