DDD release notesDankDroneDownloader catalog
Whats New?
- Added support for the Leica L mount lens.
- Added manual calibration for the zoom lens.
- Added max speed auto adjustment for the gimbal using the joystick according to the liveview FOV.
- Added support for output clean footage for playback, on-screen display switch, and applied LUT for HDMI port. Output applied LUT is only available when using the HDMI port to output clean footage.
- Added support for anamorphic display de-squeezing for the High-Bright Main Monitor when using playback.
- Added red indicator for overexposure on the waveform and a Small option for waveform size settings.
- Added support for custom features for C1 and C2 buttons.
- Added Position and Distance options in MF mode for fine focus control.
- Added support for using playback via hand grips. Press and hold the EXP button of the left hand grip to enter/exit playback. Press the MODE button to switch options, press the trigger to select footage, and use the dial on the right hand grip to adjust the progress bar during playback.
- Added support for hiding the playback progress bar automatically when no operation is performed for two seconds.
- Added support for zoom direction settings using the dial on the right hand grip.
- Added custom feature, press and hold the trigger to support Z-Axis Lock and zoom.
- Added zoom control feature when using the right hand grip, turn the dial while pressing and holding the trigger. Make sure to set the zoom feature to press and hold the trigger.
- Optimized the start up time for Ronin 4D.
- Optimized the zoom control smoothness for the zoom lens.
- Optimized the display effect for the High-Bright Main Monitor and fixed the overexposure issue for the bright areas.
- Fixed issue: some E mount lenses without calibration cannot focus stably at infinity.
- Fixed issue: gimbal settings did not take effect after importing the user profile.
- Fixed issue: iris failed to be read using the E mount lens with a manual adjustment iris ring.
- Fixed issue: gimbal mode failed to be reset after setting it to custom.
- Fixed issue: playback footage displayed slightly green.
- Fixed issue: LiDAR waveform displayed as normal but AF/AMF was occasionally unavailable.
Notes:
- Attach all the accessories to Ronin 4D before updating firmware.
- Make sure to update both the Video Transmitter and High-Bright Remote Monitor to the latest firmware version. Otherwise, the video transmission may work abnormally.
- If the update fails, restart the device and try again.
- Added support for the Leica L mount lens.
- Added manual calibration for the zoom lens.
- Added max speed auto adjustment for the gimbal using the joystick according to the liveview FOV.
- Added support for output clean footage for playback, on-screen display switch, and applied LUT for HDMI port. Output applied LUT is only available when using the HDMI port to output clean footage.
- Added support for anamorphic display de-squeezing for the High-Bright Main Monitor when using playback.
- Added red indicator for overexposure on the waveform and a Small option for waveform size settings.
- Added support for custom features for C1 and C2 buttons.
- Added Position and Distance options in MF mode for fine focus control.
- Added support for using playback via hand grips. Press and hold the EXP button of the left hand grip to enter/exit playback. Press the MODE button to switch options, press the trigger to select footage, and use the dial on the right hand grip to adjust the progress bar during playback.
- Added support for hiding the playback progress bar automatically when no operation is performed for two seconds.
- Added support for zoom direction settings using the dial on the right hand grip.
- Added custom feature, press and hold the trigger to support Z-Axis Lock and zoom.
- Added zoom control feature when using the right hand grip, turn the dial while pressing and holding the trigger. Make sure to set the zoom feature to press and hold the trigger.
- Optimized the start up time for Ronin 4D.
- Optimized the zoom control smoothness for the zoom lens.
- Optimized the display effect for the High-Bright Main Monitor and fixed the overexposure issue for the bright areas.
- Fixed issue: some E mount lenses without calibration cannot focus stably at infinity.
- Fixed issue: gimbal settings did not take effect after importing the user profile.
- Fixed issue: iris failed to be read using the E mount lens with a manual adjustment iris ring.
- Fixed issue: gimbal mode failed to be reset after setting it to custom.
- Fixed issue: playback footage displayed slightly green.
- Fixed issue: LiDAR waveform displayed as normal but AF/AMF was occasionally unavailable.
Notes:
- Attach all the accessories to Ronin 4D before updating firmware.
- Make sure to update both the Video Transmitter and High-Bright Remote Monitor to the latest firmware version. Otherwise, the video transmission may work abnormally.
- If the update fails, restart the device and try again.