DDD release notesDankDroneDownloader catalog
Whats new:
DJI Dock
- Updated the RTH to Advanced RTH.
- Optimized battery safety strategy. The dock cannot perform Continuous or Timed tasks if the battery cycle count exceeds 500 cycles. Immediate tasks and FlyTo tasks will not be affected.
- Added support to stop the flight route task after pressing the emergency stop button when the dock is preparing for the flight route task.
- Optimized the operation logic of the air conditioning system to reduce the fan noise when the air conditioning system is idle.
DJI FlightHub 2
- Added support for the aircraft to bypass GEO Zones when performing FlyTo tasks or during RTH.
- Added support to improve safety of RTH and safe Resume Task from Breakpoint. When editing the waypoints, the waypoint can be marked as a no-return point, and the flight route to its previous and next waypoints will be marked as a no-return area. The aircraft will fly along the flight route to exit the no-return area before performing RTH or Resume Flight from Breakpoint.
- Added support for DJI AirSense to improve flight safety.
- Added support to manage custom flight areas and GEO Zones in Flight Area Management, allowing for more flexible flight plans.
- Added support to control PSDK payloads in DJI FlightHub 2.
- Added support to set the palette, enable side-by-side view in the IR camera view, using RNG, and Face PinPoint in the livestream view after obtaining payload control.
- Optimized the warning messages for emergencies such as alternate landing, incorrect landing locations, or unable to land on the dock.
DJI Pilot 2
- Added warnings when configuring the dock in GEO zones.
- Added support for site selection using the DJI Mavic 3 Enterprise Series aircraft when configuring the dock.
- Added support to check the network connection for the dock.
DJI Dock
- Updated the RTH to Advanced RTH.
- Optimized battery safety strategy. The dock cannot perform Continuous or Timed tasks if the battery cycle count exceeds 500 cycles. Immediate tasks and FlyTo tasks will not be affected.
- Added support to stop the flight route task after pressing the emergency stop button when the dock is preparing for the flight route task.
- Optimized the operation logic of the air conditioning system to reduce the fan noise when the air conditioning system is idle.
DJI FlightHub 2
- Added support for the aircraft to bypass GEO Zones when performing FlyTo tasks or during RTH.
- Added support to improve safety of RTH and safe Resume Task from Breakpoint. When editing the waypoints, the waypoint can be marked as a no-return point, and the flight route to its previous and next waypoints will be marked as a no-return area. The aircraft will fly along the flight route to exit the no-return area before performing RTH or Resume Flight from Breakpoint.
- Added support for DJI AirSense to improve flight safety.
- Added support to manage custom flight areas and GEO Zones in Flight Area Management, allowing for more flexible flight plans.
- Added support to control PSDK payloads in DJI FlightHub 2.
- Added support to set the palette, enable side-by-side view in the IR camera view, using RNG, and Face PinPoint in the livestream view after obtaining payload control.
- Optimized the warning messages for emergencies such as alternate landing, incorrect landing locations, or unable to land on the dock.
DJI Pilot 2
- Added warnings when configuring the dock in GEO zones.
- Added support for site selection using the DJI Mavic 3 Enterprise Series aircraft when configuring the dock.
- Added support to check the network connection for the dock.