Официальные release notesDJI getallfile API · 2024-10-29
• Added support for Power Line Follow mode when using with M300 RTK and DJI RC Plus remote controller.
• Added Efficiency mode when enabling IMU Calibration in LiDAR Mapping task. The number of calibration flights will be reduced during the task in Efficiency mode.
• The RGB camera will not capture photos during the task if RGB Coloring is disabled when creating the LiDAR Mapping flight task.
• Optimized Power Line Follow function:
a) When the aircraft hovers above the branch point, it is supported to pause the task and resume it after manually controlling the aircraft to fly through the branch point. The point cloud recording will not be interrupted.
b) When the aircraft hovers above the branch point, it is supported to control the gimbal using the dial on the remote controller.
c) Added Mark Branch Point feature. PinPoint will be automatically added at the branch point.
Notes:
• Make sure that the aircraft firmware, the remote controller firmware, the L2 firmware, and the DJI Pilot 2 App are all updated to the latest version.
• Added Efficiency mode when enabling IMU Calibration in LiDAR Mapping task. The number of calibration flights will be reduced during the task in Efficiency mode.
• The RGB camera will not capture photos during the task if RGB Coloring is disabled when creating the LiDAR Mapping flight task.
• Optimized Power Line Follow function:
a) When the aircraft hovers above the branch point, it is supported to pause the task and resume it after manually controlling the aircraft to fly through the branch point. The point cloud recording will not be interrupted.
b) When the aircraft hovers above the branch point, it is supported to control the gimbal using the dial on the remote controller.
c) Added Mark Branch Point feature. PinPoint will be automatically added at the branch point.
Notes:
• Make sure that the aircraft firmware, the remote controller firmware, the L2 firmware, and the DJI Pilot 2 App are all updated to the latest version.