Other firmware / lt150

FPV System Air Unit Lite
01.00.0400

release notes

Что изменилось

DDD release notesDankDroneDownloader catalog
What’s New?
• Optimized the custom on-screen display of the goggles. When the video transmission is disconnected, the on-screen display will not be disabled.

Notice:
• Restart the air unit, goggles, and remote controller once the update is complete.
• Make sure that the firmware of the air unit, the goggles and the remote controller are in the same version. Check the firmware version in Setting, Device Info, and then Device Info on goggles.
• If the firmware update fails, restart the device and DJI Assistant 2 (DJI FPV Series), and try updating again.
• Update the Air Unit (Lite) when there is good ventilation. Make sure that both the goggles and remote controller are powered off before updating the Air Unit (Lite). DO NOT touch the Air Unit (Lite) during update since the temperature rises. If update fails, wait for the Air Unit (Lite) to cool down and try to update again.

Coming in Next Update:
• Ability to view HDMI live broadcast by connecting the goggles to the DJI Smart Controller.
• Menu setting to choose to enable recording after unlocking the flight controller.
• New custom on-screen display information: Home point direction, altitude, and GPS speed.
integrity evidence

Канонический SHA-256

Показывается только фактический хеш скачанного объекта. Каталожные значения источников используются внутри verification pipeline, но не выдаются за канонический результат.

Canonical object SHA-25626477f600673122ebd8400cc034af189f21fba25bd8d01129db9407d6e5a744d
compare

Сравнить с другой версией

Быстрый список сначала показывает тот же product code, затем остальные компоненты семейства.

Выбрать любую прошивку →
streaming firmware file index

Файловый браузер образа

Проверка хешей и индекс TAR/PAX, IMaH или xV4 строятся в том же потоке, что и загрузка; Range-проход используется только как fallback. Откройте файл для свойств, TEXT/HEX/ASCII или мультимедийного просмотра. Поле «Защита» — это key/scheme ID, не секретный ключ.

Индекс ещё не построен.
Это не означает, что контейнер пуст: потоковый анализатор ещё не обработал этот образ или ждёт подходящий reader/key ID.