Официальные release notesDJI getallfile API · 2020-05-08
What’s new？
Adds support for Zenmuse XT S, Z30 and XT2. Note that XT2 can only be mounted on the 1st gimbal port.
Supports the ability to select two video transmissions (FPV included) to display. Supports up to three video transmissions when using Advanced Dual Operator Mode.
Updates the manuals in DJI Pilot app.
Supports customizable button setting for the remote controller.
Supports Update All function to update firmware (aircraft, remote controller and H20 / H20T) in app.
Adds Primary Flight Display (PFD) in app, which can help users to see the aircraft information and 6 Directional Sensing and Positioning information more intuitively and easily.
Adds Smart Pin & Track, allowing users to locate and track the mobile target, and share the location.
Supports photo download from the camera for OSDK.
Supports accurate meta-tagging for PSDK payloads.
Adds support for Three-propeller Emergency Landing if the aircraft loses the capability of one motor/propeller during flight.
Optimizes obstacle avoidance logic in the vertical direction of the aircraft.
Optimizes control precision for AI Spot-check.
Optimizes battery self-heating and protection strategy and battery balancing function.
Fixed occasional issue: Breakpoints prevent the aircraft from continued flight in Flight Mission.
Notes
Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version.
Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S, XT2 or H20 / H20T.
It is required to use the DJI Pilot app built-in the remote controller, or download the app of V1.8.0R or later.
Adds support for Zenmuse XT S, Z30 and XT2. Note that XT2 can only be mounted on the 1st gimbal port.
Supports the ability to select two video transmissions (FPV included) to display. Supports up to three video transmissions when using Advanced Dual Operator Mode.
Updates the manuals in DJI Pilot app.
Supports customizable button setting for the remote controller.
Supports Update All function to update firmware (aircraft, remote controller and H20 / H20T) in app.
Adds Primary Flight Display (PFD) in app, which can help users to see the aircraft information and 6 Directional Sensing and Positioning information more intuitively and easily.
Adds Smart Pin & Track, allowing users to locate and track the mobile target, and share the location.
Supports photo download from the camera for OSDK.
Supports accurate meta-tagging for PSDK payloads.
Adds support for Three-propeller Emergency Landing if the aircraft loses the capability of one motor/propeller during flight.
Optimizes obstacle avoidance logic in the vertical direction of the aircraft.
Optimizes control precision for AI Spot-check.
Optimizes battery self-heating and protection strategy and battery balancing function.
Fixed occasional issue: Breakpoints prevent the aircraft from continued flight in Flight Mission.
Notes
Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version.
Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S, XT2 or H20 / H20T.
It is required to use the DJI Pilot app built-in the remote controller, or download the app of V1.8.0R or later.